Flange Mounted Motor / Foot Mounted Motor
Product Introduction
RATM-L Flange Mounted Motor
RATM-E Foot Mounted Motor
ITEM | DENOMINATION | ITEM | DENOMINATION | ITEM | DENOMINATION |
1 | HOUSING | 10 | SNAP RING | 20 | KEY |
1A | HOUSING | 11 | OILLESS BEARING | 21 | IST MAIN GEAR |
2 | FRONT COVER-MOTOR | 12 | BALL BEARING | 22 | SNA PRING |
3 | O-RING | 13 | 3RD PINION GEAR | 23 | BALL BEARING |
4 | OIL SEAL | 14 | KEY | 24 | MOTOR |
5 | BALL BEARING | 15 | 2ND MAIN GEAR | 25 | WIRF BOX |
6 | KEY | 16 | SNAPRING | 26 | FAN |
7 | OUTPUT SHAFT | 17 | BALL BEARING | 27 | FAN COVER |
8 | KEY | 18 | BALL BEARING | ||
9 | 3RD MAIN GEAR | 19 | 2ND PINION GEAR |
Standard IEC Aluminum 3-phase Motor with Brake
Flange | |||||||||
AD | AE | LB | LD | LA | M | N | P | S | T |
98 | 67 | 199 | 78 | 12 | 130 | 110 | 160 | 10 | 3.5 |
106 | 75 | 230 | 91 | 12 | 130 | 110 | 160 | 10 | 3.5 |
124 | 83 | 235 | 86 | 12 | 165 | 130 | 200 | 12 | 3.5 |
135 | 94 | 293 | 118 | 12 | 165 | 130 | 200 | 12 | 3.5 |
Specification | Dimensioins | Shared | |||||||||||||||||||||
Output(Hp) | Size | AC | KK | L | A | AB | B | BB | C | H | HA | HC | HE | K | LE | Shaft end | |||||||
4p | 6p | 8p | D | E | ED | F | G | GA | |||||||||||||||
1/8;1/4 | - | - | 63 | 112 | PG9 | 222 | 100 | 120 | 80 | 100 | 40 | 63 | 8.0 | 161 | 130 | 7 | 79 | 11 | 23 | 18 | 4 | 8.5 | 12.5 |
1/2 | 1/4 | - | 71 | 133 | PG9 | 260 | 112 | 140 | 90 | 119 | 45 | 71 | 8.0 | 177 | 146 | 7 | 95 | 14 | 30 | 25 | 5 | 11.0 | 16 |
1 | 1/2 | - | 80 | 156 | PG11 | 275 | 125 | 125 | 100 | 130 | 50 | 80 | 8.0 | 204 | 168 | 10 | 85 | 19 | 40 | 35 | 6 | 15 | 21.5 |
2 | 1 | 1/2 | 90L | 175 | PG11 | 343 | 140 | 140 | 125 | 150 | 56 | 90 | 11.0 | 225 | 189 | 10 | 112 | 24 | 50 | 45 | 8 | 20 | 27.0 |
1. Above specification are subject to change without prior notice.
